Durability. Percision. Excellence.

Professional Concrete & Asphalt Solutions in Burnaby, Vancouver & the Lower Mainland

Home » Services » Concrete and Asphalt Solution
Why Choose Able Boys Landscaping

Reliable Paving for Vancouver’s Residential & Commercial Properties Built to Withstand the Wet Coast Climate

In the Lower Mainland, concrete and asphalt surfaces face constant challenges from heavy rainfall and temperature fluctuations. Without a professional foundation and proper thickness, driveways quickly crack, sink, or erode.

Able Boys Landscaping provides heavy-duty paving solutions designed for longevity. Whether you need a sleek new concrete driveway in Burnaby or a durable asphalt parking pad in Vancouver, we deliver industrial-strength results for residential homes and commercial spaces. Our focus is:

  • Sub-Grade Stability: Using heavily compacted road base to prevent surface failure.
  • Water Management: Precision grading to ensure runoff flows toward drains, not your foundation.
  • Premium Mix Designs: Using BC-standard concrete and asphalt blends for maximum wear resistance.
  • Reinforced Structures: Implementing rebar and wire mesh where necessary for crack prevention.

Every project comes backed by over 30 years of experience, ensuring your property is safe, secure, and beautiful.

Over 30 Years of Experience

Our 4-Step Paving Process

In Greater Vancouver, a driveway is only as good as its foundation. Most local failures occur when contractors skip deep-base preparation. We build every project to handle the Lower Mainland’s high water table and heavy rainfall. By using mechanically compacted road base, we prevent sinking and cracking. Whether for heavy vehicles or curb appeal, our surfaces remain level and puddle-free through every season.

schedule your free Paving Estimate Today!
Step 1: Site Grading & Drainage Layout

We assess the natural slope of your property. In Greater Vancouver, water management is the most critical part of a paving project. We ensure all surfaces are graded to shed water efficiently.

Step 2: Excavation & Road Base Compaction

We excavate the existing soil and replace it with high-quality, crushed road base. This base is mechanically compacted to provide a rock-solid foundation that prevents the concrete or asphalt from sinking.

Step 3: Forming & Material Pouring

For concrete, we build precise wooden forms and install reinforcement. For asphalt, we lay the hot mix at the optimal temperature and use heavy-duty rollers to achieve a dense, smooth finish.

Step 4: Curing & Surface Protection

We manage the curing process to prevent rapid drying and cracking. Once cured, we can apply specialized sealants that protect the surface from oil stains, salt, and moisture penetration.

Frequently Asked Questions About Paving in the Fraser Valley

Concrete is more durable and lasts longer (30-40 years) but has a higher upfront cost. Asphalt is more affordable and easier to repair, but it requires periodic seal coating and typically lasts 15-20 years in the Lower Mainland.

While all concrete wants to crack, we control it by using internal reinforcement (rebar) and cutting “control joints” at specific intervals. This allows the concrete to expand and contract with BC’s temperature changes without creating ugly surface cracks.

While all concrete wants to crack, we control it by using internal reinforcement (rebar) and cutting “control joints” at specific intervals. This allows the concrete to expand and contract with BC’s temperature changes without creating ugly surface cracks.

For asphalt, you can usually drive on it after 24-48 hours. For concrete, we recommend waiting a minimum of 7 days before parking a vehicle on the surface to allow it to reach full structural strength.

In cities like Burnaby and Vancouver, most residential driveway replacements do not require a permit as long as you are not changing the “curb cut” or the city-owned sidewalk. If you are widening the driveway entrance, we can help you navigate the municipal application process.

Maintenance is the key to longevity in our rainy environment. For asphalt, we recommend applying a professional seal coat every 2–3 years to protect against moisture and UV damage. For concrete, an annual cleaning and a high-quality penetrating sealer will prevent “spalling” (surface flaking) caused by winter salt and freeze-thaw cycles. Keeping your drains clear of leaves and debris is also essential to prevent water from pooling on your driveway during heavy BC rainstorms.